Monday 22 July 2024
15.8 C

Air accident investigation completed after engine failure plane crash at a Nottinghamshire airport

During a training flight, a Reims Cessna FRA150M (G-BDNR) carried out a forced landing in a field approximately four miles from Retford Gamston Airport, Nottinghamshire, after suffering engine failure on 1 August 2022.

Location: Approx 4 miles NNE of Retford Gamston Airport, Nottinghamshire

On the return leg from a training flight to the Humber Bridge, the number 3 cylinder and piston broke free from the engine, which caused engine failure during the flight. The pilot carried out a forced landing in a field, which resulted in significant damage to the aircraft and minor injuries to the passenger on board.

An examination of the engine crankcase found that the number 3 cylinder’s studs had failed due to crack progression in fatigue.

When the studs were replaced during the overhaul a number of the studs’ threads were stripped before the required torque values could be achieved.

- Advertisement -

This issue was also identified on a number of other engines of this type. Analysis revealed that the nuts used to fasten the cylinders were distorting and stripping the stud threads before reaching the required torque value or, were failing at values just above the required torque.

As a result of these findings, the Type Certificate Holder has introduced a Service Bulletin to replace cylinder base studs during the overhaul of the RR O-240 engine and carry out repetitive torque checks following their replacement.


Follow The Wire on TikTok, Facebook, X, Instagram. Send your story to or via WhatsApp on 0115 772 0418